K Tech Fluid Controls

#ThreadedBallValveManufacturer.
1PC/2PC K-TECH  Ball Valve

3PC K-TECH Ball Valve

K-TECH FLUID CONTROLS is one of the Leading Forges Steel Ball valves manufacturers in, Gujarat, India. Floating ball Valves: Carbon steels, stainless steels and variety of alloy steels. Two piece and three-piece designs. Soft seated and metal seated; 150, 300 and 600 lbs in cast version, 800 lbs in Forged Bar. Full Bore and reduced bore; sizes ½" to 8".

K-TECH Brand offers a range of Fully Jacketed Ball Valves. The jacket covers the body from one flange to the other flange. The body is modified by adding oversize flanges. As example: 2" x 3" Jacketed Ball Valve has the nominal bore of 2" (DN 50) and the flange size is 3"(DN 80). It allows enough space for bolting clearance.

K-TECHBrand Offer a whole range of Ball valves in a variety of sizes, pressure ratings and materials, in wafer style, or screwed, welded or flanged connections. A ball valve has a quarter turn spindle connected to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked.

• SIZES : 1/4" to 24"
• TYPE : Two Way, Three Way, Four Way Ball Valves
• DESIGN : Single Pc,Two Pc & Three Pc Design Ball Valves
• END CONNECTION : Screwed End / Socket Weld / Flanged End Ball Valves
• PRESSURE RATING ASA : 150#, 300#, 600#, 800#
• WIDELY USED FOR : Process Chemicals, Air, Gas, Water and Many More.
• OPERATION AVAILABLE : Manual, Gear Operated, Electro Pneumatic, Electric Actuated, Cylinder, etc.
• PORT : Full Port & Regular Port
• MOC : Ball Valves: Cast Iron / Cast Steel / Forged Steel / SS 304 / 316, SS 304L / 316 L, PTFE / POLYPROPYLENE Lined.

• Manufacturing Standard : BS 5351
• Inspection And Testing Standard : API 598
• Pressure-Temperature Rating : ASME B 16.34
• Screwed End Dimension : ASME B 1.20.1
• Flanged End Standard : ASME B 16.5
• Socket Weld Dimension : ASME B 16.11

K-TECH manufacturing Fire Safe Ball Valve as per API 607 standard in Full / Reduced Port with Antistatic Device, Blowout Proof Stem with various choice of operation.

K-TECH Manufacturing Floating & Trunnion Mounted Fires Safe Ball Valves. In the floating ball design, where sealing takes place by allowing the Ball under pressure to move towards the downstream seat to effect tight seal. For higher sizes and pressure ratings Trunnion mounted ball valves are preferred by industry.

K-TECH Fire Safe Ball Valves available with different type of Seat, Seal & Packing material such as P.T.F.E. (Virgin) / Glass Filled P.T.F.E. / Carbon Filled P.T.F.E. / Graphite (Grafoil) / PEEK to suit special requirement of client.

single / two / three piece design, full bore / regular (reduce) bore two way floating / trunnion mounted ball valves

k-tech fluid controls high performance ball valve, superior quality, workmanship & service. K-tech ball valves in single piece (1/2” to 4”) / two piece (1” to 8”) and three-piece design (1/2” to 12”) to suit various critical, non-critical applications and pressure rating up to 1500#in both full bore & regular (reduce) bore design.

k-tech p. T. F. E. Seated ball valves gives zero leakage, tight shut-off and low torque with easy smooth operation at temperature ranging from -20° c. To +220° c. Electro-polished, buff finish & ultra clean valve also provided for food & pharmaceutical industries on request.

K-TECH FLUID CONTROLS high pressure 3-way block type ball valve are units which serve to shut off the flow of an operating medium in both directions. By turning the control spindle the flow is diverted, according to the ball bore, and the opposite side is shut off leakage free. These 3 way ball valves are not designed to be used as flow control valve, therefore they should always be either fully open or fully closed to avoid damaging the sealing cups.

1. Size Range : 1/4" to 3”
2. Type : 2 way, 3 way, 4 way
3. End Connections : Flanged/NPT/BSP/SW/BW
4. Body : Block
5. Material : SS 304/ SS 316/ SS 316L/ CS
6. Seat : PTFE
7. Working Pressure : 210 bar TO 420 bar depending on valve size and valve materials selected
8. Temperature Range : +10°C to +100°C

K-TECH FLUID CONTROLS is one of the top-rated industrial Ball valves manufacturers in Gujarat, India. We are the Best industrial Ball valves Manufacturer and supplier. Our service is founded on the principle of supplying customized valve design and production as per the needs and demands of our customers.

• Floating ball
• Bubble tightness with valve on closed position
• Low pressure drop
• Possible installation on both flow directions
• High reliability
• Construction according to standard ANSI/ASME B16.10 ANSI/ASME B16.25,BS 5351
• Pressure classes: 150 - 300 - 600
• Dimension: 1/2'to 3"
• Full bore and reduced bore
• Connection: RF