K Tech Fluid Controls

K-TECH FLUID CONTROLS Manufacturer and suppliers of Investment Casting Disc Check Valve Non-Slam Check Valve or Non-Return Valves in INDIA. This Non-Slam Check Valves are used in Water hammering Line and maintaining the Back Pressure in Piping System.

Our Non-Slam Disc Check Valve are made of stainless steel which stand up to 300°C.

K-TECH Disc Check Valve (Non-Slam Check Valve) Open and Closed Quickly Against the Opposite Flow Acting on Disc & Provide the Full Flow in Line

It Occupy Very Less Space and Provide Full Flow & Spring Will Prevent the Reverse Flow In Pipe Lines

Zero Leakage with Soft Seated, Light In Weight And Easy Installation

Testing Standard: API 598

Size: 15 Mm To 200 Mm – ½ “- 8”

Body: Investment Casting S.S 304, S.S 316

Disc: Aisi 304, Aisi316 (Bar Stock / Castings)

Spring: Compression Type Stainless Steel

Pressure & Temperature: Pn 40 Up To 300°C

End Connection: Wafer / Screwed

Insp & Test Std: Api 598

Hyd-Test Pressure: Body : 854 Psig (60 Kg/Cm ²), Seat : 569 Psig (40 Kg/Cm ²)

Disc Check type Non-Return Valve with spring loaded. These valves are very useful where weight of the valve is required be low & there is a space constraint for valve fitment. K-TECH is NON-RETURN VALVE Manufacturers in Ahmedabad, Gujarat, India.

Application

Isolation

Features / Benefit

Lift Type Design Welded & Renewable Seat Rings

Ansi Class / Rating

800#, 1500# , 2500#

Design Standard

BS 5352, API 602/ISO 15761/ASME B16.34

Testing Standard

ISO 5208

Size

15 mm to 50 mm

Materials

Body : A105, F11, F22, LF2, F304, F304L, F316, F316L, F51,F53, F55, F347,F321,INCONEL 625, MONEL 400, HASTELLOY C-276, ALLOY 20
Trim : 13 % Cr, Stellite etc

Ends

Screwed End, Socket Weld End, Butt Weld End, Flange End

Operation

Manual

• DESIGN STANDARD: IS 5312:2004
• MODEL: SWING CHECK (RUBBER FLAP/GUN METAL FLAP)
• FLANGE STANDARD: IS : 1538
• INSTALLATION: FLEXIBLE
• SIZE: DN50 TO DN400
• TEST PRESSURE: BODY / SHELL : 24 KG/CM², SEAT : 16 KG/CM²